Description: Built with the best construction and electronic components, The Auto Open Heat Press with lower slide table high standards enable you to multi-task while helping to avoid over-application and ruined garments. The gas springs allows the platen to distribute the pressure evenly which allows for the best in excellent transfer images. Every Copper heating element is scrutinized thoroughly so it heats up quickly and effectively. Only then is it cast into the Aluminum Alloy or Mica Platen.
Warm Tips:
1. To avoid automatic pop-up, the magnetic machine's pressure should be adjusted to the minimum during transportation. The customer must increase the pressure before using it.
2. For sublimation on photoslate, ceramic tile, glass,you'd better make the printable surface be inverted to the workbench to make sure better sublimation finishing.
Data Sheet:
Voltage: 110V, 50Hz, 14A
Transfer Size: 16in x 20in(40 cm x 50 cm)
Power: 1600W
Time Range: 0-999S
Temperature Range: 0-250°C (32-482°F)
Working Mode: Manual
Control Mode: LCD Screen
Set Time & Temperature
1.Press on the on / off switch located on the side of the heat press to be energized.
2.Press once on the "SET", screen show "SP" on the display. Press "▼"or "▲" to the desired temperature.
3.Press once again on "SET", screen show "St" on the display.Press "▼"or "▲" to the desired time.
4.Press "SET" for a few seconds after finish all setting to come out setting mode.
"COUNTER" means how many times you have pressed
If you want to clean this number to zero,press "RESET" "▼" for a few seconds
5.Put objects when the machine has reached the desired temperature, close heating plates, waiting time.
6.When times up, machine will open automatic, take out printing items.
