Description
GF 210 is a specially formulated flexible vinyl with a high performance acrylic pressure sensitive adhesive on a 135gsm Layflat liner. The combination of vinyl and adhesive allows removability of the film from most common commercial tile floor substrates for up to 6 months under normal exposure conditions. This film is designed to accept a variety of solvent-based inkjet and UV curable inks common to wide format digital printing systems.
| Applications: |
GF 210 is designed for temporary floor signs, decals, and point of purchase advertising.
Must use either GF 109, GF 211, or GF 213 (overlaminate) to provide protection to the graphics. |
| Film Thickness: |
85mic
(Thickness variance +/- 10%) |
| Adhesive Thickness |
25mic
(Thickness variance +/- 10%) |
| Liner Thickness |
135gsm
(Thickness variance +/- 10%) |
| Temperature Ranges: |
Minimum application temperature +4,4°Celsius
Service Temperature -40°C to +82°C.
|
| Adhesion: |
To stainless steel 5 N/25mm (FTM01. Typical values. Individual values may vary. Test thoroughly before production. |
| Removability: |
Up to 6 months from most common commercial tile floors. Floor must be clean before application. All tiles must be firmly attached to the sub floor. Painted floors must have excellent adhesion to the sub floor. Test all painted cement floors for adhesion of the paint before applying a floor decal. |
| Water Resistance: |
Good. Do not saturate. |
| Humidity Resistance: |
Excellent. |
| Solvent Resistance: |
Excellent. |
| Storage Stability: |
1-year shelf life when stored at 21°C and 50% relative humidity. |
| Product Codes: |
E210-54 1,37m x 50m |
| Recommendations: |
Completely evaporate inkjet solvents before application. Failure to do so may facilitate solvent penetration resulting in vinyl degradation. |
