Increase visibility in low-light conditions.
CAD-CUT® Reflective heat transfer material improves visibility on safety and athletic wear.
Reflective is compliant with some ANSI safety standards. Use a heat press to apply.
Has a non pressure sensitive frosted carrier.
Recommended fabrics: cotton, polyester, nylon, Cordura®
 | Time tack 2 seconds, peel warm, cover and seal 15 seconds |
 | Temperature 330°F/165°C |
 | Pressure medium |
 | Peel warm |
Care Instructions
Turn garment inside out. Wash on gentle cycle, cold water, mild detergent. No bleach, no whiteners. Dry in household dryer on low to medium setting. To prolong life of reflectivity, hand washing and line drying is recommended.
Cutting Notes
Remove pink plastic liner. For optimal cutting and weeding, maintain a line thickness of at least 1/8” for lettering & logos.
Cutter Guidelines
| Cutter | Blade | Force | Offset | Speed |
| Roland GX-24 | 45° / 60° | 100-150g / 120-150g | .25 / .30 | 50cm/s |
| Ioline 100 | 45° | 100g | .15 | 12:30 |
| Ioline 300 | 30° | 85g | .15 | 12:15 |
Multi-Color Designs
Stahls’ CAD-CUT Reflective can be used as a foreground to Stahls’ other CAD-CUT materials.
Accessories Required
Cover Sheet, EZ Weeder or Tweezers, Magic Mask Liner
Please Note:
Due to the combination of fabrics, weaves, coatings, and dyes used in the textile industry, Stahls’ recommends testing of our heat transfer materials and media before application.
Failure to remove pink plastic liner may result in damaged blades.
The first lab-certified heat transfer material in the industry.
Stahls’ is the first company in the imprinted sportswear industry to have a rigorous lab certification process. This ensures the highest quality materials to meet the needs of all of your real-world applications. Depending on the material, we run tests based on these parameters: safety, durability, and performance. The materials are rated on a scale from 1 to 5, 5 being the highest rating.
COMPOSITION
This material is made of 110 micron Polyurethane (PU).
STORAGE
Store in a cool, dry area. For best results, keep material away from direct sunlight, heat, and humidity.
LAB CERTIFICATION RATINGS
